|
The Loctite® Posi-Link 200 - 400 Actuator provides adhesive dispensing by effecting incremental movements of a piston and displacing programmable quantities of adhesive with a dual cartridge. The Actuator consists of a remote dispense head tethered to the Actuator housing.
Click here for Product Description Sheet showing operating principle.
This Posi-Link 200-400 Actuator is to be used with Loctite® brand 200 ml or 400 ml. pre-packaged, dual cartridges with 1:1, or 2:1 mix ratios or 400 ml or 490 ml pre-packaged, dual cartridges with a 10:1 mix ratio. This actuator is for mounted and robotic applications. This actuator can be used for all viscosities.
Features:
-
Flexible orientation in any position.
-
Easily fits below an industrial workbench or wall mounts with brackets supplied to conserve benchtop space
-
Light weight remote dispense head has a positive link to actuator via a 7 foot tether, allowing ergonomic hand-held dispensing or mounting directly on robotic arms.
-
Easily attaches to dual cartridge nest (sold separately) to accommodate alternate dual cartridge sizes.
-
Adhesive pressure: Mechanically driven vs. traditional air pressure driven, eliminating risk of air infiltration into adhesive
-
Suck-Back: Prevents drip at end of dispense, and is mechanical driven vs. traditional air vacuum driven, eliminating risk of adhesive being sucked into the system
Technical Data:
-
Total Weight: 20 lbs.
-
Dispense Head Weight (including nest and optional pinch tube valve): 10.0 lbs.
-
Air Supply: 40 to 100 psi.
-
Posi-Link Electro / Mechanical Tether Length: 7 feet
-
Minimum Dispense Volume: 0.01 ml.
-
Maximum Dispense Rate: 1.0 ml/sec.
|
